Iberia Industrial & Marine has the hose and fitting products you need! We stock & supply a full line of hose and related products, and can custom assemble hose system as per your specifications right here at our hose store! We are your hose source in the Lafayette & Broussard Louisiana area!
Connect with us now!

 
 

Industrial Hose

AIR & MULTIPURPOSE HOSE

LOR GENERAL PURPOSE AIR & WATER HOSE
Available in various colors, this general purpose air and water hose provides job/color coding possibilities for safety and other considerations. A very economical general service air and water hose, it can be used in numerous industrial, agricultural and construction applications where oil is not a factor. It is easy to handle and very flexible due to its multi-spiral layers of durable reinforcing polyester yarn. Available in a wide variety of sizes and working pressures, it has an EPDM tube and cover that resist abrasion, heat and ozone. This hose is not to be used as a steam hose.

MOR GENERAL PURPOSE AIR & WATER HOSE
This air and multi-purpose hose is designed to handle the oily mists used to lubricate pneumatic tools. Featuring a medium oil-resistant tube with multi-spiral polyester reinforcement, the hose remains flexible even in extreme temperatures. Its durable cover resists abrasion, cracking, weathering and ozone. Not recommended for handling fuels.

JACKHAMMER HOSE
Rugged four-spiral, with various psi construction, these assemblies can tackle the job that only a jackhammer can dish out. The EPDM tube and cover handle heat, ozone and weather cracking better than other compounds. These hoses are assembled at the factory, crimped with universal (Chicago, CP) fittings at each end. Durability is built in and this hose is ready for hard work.

AIR TOOL HOSE
This lightweight utility-grade air hose is economically designed for indoor and outdoor applications operating in temperate climate conditions. Pre-assembled in 50-foot sections and coupled with brass 1/4" male pipe thread fitting on each end. Mostly assembled with rubber or PVC hose. Custom lengths available.

PUSH-ON HOSE
Designed specifically for use with robotic welders and industrial applications requiring an MSHA-approved flame-resistant cover, Push-On Hose is a premium 300 psi, oil-resistant, non-conductive push-on hose that provides safe and reliable performance in oily and harsh conditions. It features an excellent coupling retention and a superior hold created by a unique spiral angle design and polyester reinforcement that firmly grips the fitting and will not give under pressure.

WASH-DOWN HOSE
This white wash-down hose or "creamery hose" is designed for wash-down service in creameries, dairies, packing houses, canneries and food processing plants. It features an EPDM tube and cover that resist scuffing and cracking, and is color-coded white to indicate wash-down service and cleanliness. This hose handles hot water up to 200°F at 50 psi, and is rated for working pressures up to 250 psi on 1/2” I.D

HEAVY-DUTY MULTI-PURPOSE
A highly versatile, multi-purpose hose designed for high pressure applications and extreme temperature environments ranging from -40°F to +212°F. It is ideal for use in rock-drilling, air -hammer and water-jetting applications in heavy construction, mining or quarry operations, as well as the transfer of petroleum or other solvent solutions, and washer operations. This hose is non-conductive and MSHA-approved with a Class A RMA rating, providing a constant 1,000 psi working pressure, with a minimum 4:1 burst safety factor.

RUBBER APPLICATION HOSE

WIRE-BRAIDED AIR HOSE
For heavy-duty air supply in mining, quarries, construction, industrial air placement, sandblasting and heavy-duty equipment rental. Oil mist-resistant tube with high working pressure. Cover is bright yellow and heavy duty for great durability.

WATER-SUCTION HOSE
A flexible and economical hose for suction, discharge, or gravity flow of water in construction, mining, oil exploration, agriculture and equipment rental. Resistant to water-based AG fertilizers and salt water. Cover is abrasion- and weather-resistant.

WATER DISCHARGE HOSE
For medium to heavy-duty discharge of water in construction, mining, oil exploration, agriculture, equipment rental, in-plant service and more. Can be crimped or banded to make assemblies per your specifications.

CORRUGATED EPDM SUCTION HOSE
This lightweight, flexible, and durable hose makes for easy handling in irrigation lines, septic service, trash pumps, marine, and irrigation applications. Known as Tigerflex Green or Series 2000. Can be crimped or banded to make assemblies per your specifications.

ABRASION-RESISTANT CORRUGATED SBR SUCTION HOSE
Abrasive suction for crushed rock, sand, dry fertilizer, small gravel and powdered cement. Can also be used as a boom hose for catch basin clean-out. Lightweight, heavy-duty abrasion resistance, -40°F cold-weather resistance, sub-zero flexibility, and a ground wire is not needed as the tube-and-cover compound are static-dissipating.

FUEL DROP HOSE
Tank-truck gravity drop hose for such items as gasoline, naphtha, kerosene, light and heavy oil, diesel, and up to 15% ethanol mixture. Not for biodiesel.

TANK TRUCK HOSE
Tank Truck Hose is a top-of-the-line product for use in tank truck and in-plant operations to transfer gasoline, oil, ethanol blends and other petroleum-base products up to 50% aromatic content. It is designed for pressure, gravity flow, or full suction service.

UHMWPE CHEMICAL HOSE
UHMWPE Chemical Hose is a high-end industrial hose for the transfer of corrosive fluids and solvents in suction or discharge applications. It handles the majority of common industrial chemicals.

HOT TAR & ASPHALT HOSE
Hot Tar & Asphalt Hose is an industrial suction and discharge hose designed to handle high-temperature materials such as hot asphalt, glue, oil, tar and wax to 300°F continuous and 350°F intermittent (149°C/177°C). The hose also handles refined fuels such as biodiesel (to B100 in dedicated service), diesel, ethanol and gasoline. The hose construction incorporates a dual wire helix that provides full suction capability, kink resistance and a path to conduct a static electrical charge to ground. The cover is resistant to abrasion, heat, oil and weathering.

FOOD SUCTION HOSE
For suction of flour, sugar, syrup, grains, or similar products. FDA-grade, white, natural-rubber tube. All sizes rated for full vacuum.

FOOD SUCTION HOSE
For suction of liquid food products. Tube resists oily material.

BREWERY/WINERY HOSE
A state-of-the-art designed rubber hoses based on the specific requirements of the modern-day brewery or winery. Rugged but flexible construction with a super smooth white hose tube, this hose is for non-oily applications, is microbe-resistant, and has an EPDM cover that resists dirt scuffs and is easily cleaned. Built on stainless steel mandrels for cleanliness and meets FDA, USDA and 3-A (certificate #1376) requirements.

STEAM HOSE
Rugged wire-braided steam hose recommended for saturated and super-heated steam applications. Used in shipyards, manufacturing, chemical and petroleum plants, food, lumber, pulp, and processing industries. Cover is weather- and ozone resistant. Available with chlorobutyl tube.

SANDBLAST HOSE
Used with grit, aluminum oxide, glass beads, etc., and is ideal for rugged use in shipyards and construction sites.

MATERIAL SUCTION HOSE
Hard-wall hose designed with a high abrasion-resistant tube. Ideal for applications where suction and/or discharge of abrasive media is required. Can be crimped or banded to make assemblies per your specifications.

MATERIAL DISCHARGE HOSE
Soft-wall hose designed with a high abrasion-resistant tube. Ideal for applications where discharging of abrasive media is required. Can be crimped or banded to make assemblies per your specifications. Available in 1/8" 3/16" and 1/4" tube.

HOT AIR BLOWER HOSE
Premium level hose for connecting blower to flow lines on dry bulk trailers. The tube of this hose is designed to handle the heat from the air blower supply, and the cover is designed to handle the effects of weather and ozone. Can be crimped or banded to make assemblies per your specifications.

PRESSURE WASHER HOSE
This wire-reinforced hose is rated for 3,000 psi to 5,000 psi service. It's coupled with 3/8" MPT swivel X 3/8" MPT stationary fittings with ergonomic bend restrictors at each end. It can be used with hot or cold water and mild detergents, but is not recommended for steam service. Good to 212°F

 

PLASTIC HOSE & TUBING

PVC SUCTION HOSE
Economical suction hose for water and light chemical applications. Can be crimped or banded to make assemblies per your specifications.

PVC DISCHARGE HOSE
Economical, lightweight, lay-flat hose for light-duty discharge applications. Tube and cover are simultaneously extruded for maximum possible bonding during manufacturing. Can be crimped or banded to make assemblies per your specifications.

HEAVY DUTY PVC HOSE
Heavy-duty suction and discharge hose for use in a variety of industries, such as rental pumping equipment and applications where the hose needs to slide easily, or visual confirmation of material flow is necessary.

NITRILE/PVC HOSE
For the transfer of water, wash-down, jetting and irrigation. Oil-resistant tube and cover. Resists heat and cold, abrasion, ozone and UV. This hose is lightweight and flexible. For use in industrial wash-down, irrigation, general dewatering, pump discharge and drainage.

CLEAR BRAIDED PVC TUBING
Food-grade, clear hose with textile braided reinforcement for added strength. For water and light chemical transfer applications where visual inspection of material flow is necessary. FDA layline. Often used in food processing. Can be crimped or banded to make assemblies per your specifications.

CLEAR VINYL TUBING
Food-grade, clear hose for water and light chemical transfer applications where visual inspection of material flow is necessary. Available in various wall thicknesses in certain sizes. FDA approved. Can be crimped or banded to make assemblies per your specifications.

SPRING WIRE PVC HOSE
Food grade, clear hose with steel spring-wire reinforcement suitable for vacuum service. For water, food and beverage dispensing, deionized water systems, and light chemical transfer applications where visual inspection of material flow is necessary. FDA approved. Can be crimped or banded to make assemblies per your specifications.

 

FIRE & MILL HOSE

FIRE HOSE ASSEMBLIES
RAGCO Fire Hose shall be of superior quality and workmanship. The hose shall withstand the rough usage of front-line firefighting, and other discharge applications.

SINGLE JACKET MILL HOSE
Heavy-duty, but lightweight synthetic cover for better abrasion resistance and abuse. Higher working pressures. For water discharge service in rental yards, fleet service, municipal wash-down, utility dewatering. Available in bulk hose, standard and custom assemblies.

DOUBLE JACKET MILL HOSE
A double covered, lightweight, and flexible discharge hose for municipal wash-down, hydrant water supply lines, equipment & pump rental, shipyard wash-down, and other various discharge applications. Increased abrasion resistance and pressure rating. This economical hose rolls up flat for easy storage and transfer.

Full Industrial Hose Catalog

 

Hose Fittings, Couplings, & Accessories

CAM AND GROOVE FITTINGS
A cam and groove coupling, also called a "camlock" fitting, is a form of hose coupling popular because it is a simple and reliable means of connecting and disconnecting quickly and without tools.

PIN-LUG COUPLINGS
Also called "suction hose couplings," these are threaded couplings used for suction or discharge of water or other fluids.

COMBINATION HOSE NIPPLES
Combination hose nipples are used in a variety of fluid applications. They are available in unplated steel, plated steel, polypropylene, and stainless steel.

UNIVERSAL AIR COUPLINGS
Also called "Chicago," "CP," or "Crow's Foot" couplings. Used to connect air lines from compressors or other air sources to all types of pneumatic tools and equipment. All 2-lug head connections are of one size for easy interchange.

GROUND JOINT COUPLINGS
An all-purpose coupling, the female ground joint consists of a MALE STEM, WING NUT and FEMALE SPUD. The female spud has NPT threads to accept the NPT threads of a rigid connection or male NPT nipple. Widely used for air, water or steam, the ground joint is secured with an interlocking clamp or ferrule.

SANDBLAST COUPLINGS
There are three active sandblast system couplings: NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot, and HOSE ENDS that are used to make hose-to-hose connections or hose-to-blast pot connections.

HOSE MENDERS
Hose menders repair hoses up to and including IDs of 12". After cutting out the damaged hose portion, insert each end of the mender (shanks) into the remaining good ends of the hose.

PUSH-ON FITTINGS
Brass Push-On Fittings are specially manufactured for use with push-on hoses in low pressure applications. No clamp or ferrule is required if properly inserted.

BRASS THREADED HOSE FITTINGS
Recommended for low pressure air and water applications. Attachable with ferrules or hose clamps. Also available in stainless steel.

GARDEN HOSE FITTINGS
Brass fittings with standard garden hose thread (GHT) for general purpose use. The female end swivels for easy connection. Many adapters are available for making the connection to the pipe thread.

LOCKING LEVER COUPLINGS
For use with water pumps and irrigation. Locking lever fittings are galvanized quick couplings, each with a double-pin locking lever for smooth closing. Not recommended for use with toxic chemicals. O-Ring is included in all female parts.

QUICK DETACHABLE COUPLERS
All engagements available.

 

SUCTION HOSE STRAINERS
Used on the submersed end of suction hose to prevent debris from entering the pump during operation. All threads are NPS. "Trash strainers" are square hole. For the best strainer for your application, call your local RAGCO location.

FOOT VALVES
Foot valves are used on the submersed end of the water suction hose to prevent the pump from losing its prime when it's shut down.

BRASS BALL VALVES
Standard full-port, quarter-turn, brass ball valves rated for 600psi WOG (up to 2") and 400psi WOG (2 ½" thru 4"). Female NPT thread each side. Chromium-plated brass ball and Teflon ® ball seat. Available with locking handles and in stainless steel.

THREADED FLANGES
Forged carbon steel, raised-face, threaded 150# ANSI flanges. Female threaded for easy installation on hose, pipe, or equipment with male threads. Available in blank, slip-on, and weldable version. Also available in stainless steel.

WHIP CHECKS
Whip Checks are attachable safety cables for the prevention of hose whip in case of the accidental separation DUAL DIAMETER SPANNER of a coupling or clamp device.

WRENCHES
All types for hose or hydrant attachment.

NOZZLES
All types: fog, tapered, wash-down, garden hose, pressure washer, and others.

BRASS PIN-LUG HYDRANT ADAPTERS
For industrial utility and fire department applications, these adapters allow easy connections from hydrant to smaller size hose.

HOSE CLAMPS
All types: worm gear, band clamps, t-bolt clamps, double bolt clamps, spiral clamps, center punch clamps, strapping & banding, and more.

PIPE FITTINGS
Black iron, galvanized, brass, stainless steel and other metal fittings for adapting and routing of fluids & air. Includes nipples, tees, elbows, crosses, bushings, reducers, and other common engagements.

Full Industrial Hose Fittings & Accessories Catalog